If you suffer a puncture, specialists Commercial Workshop Blaspa multibrand are there to check the tire for you and for repair, if deemed appropriate, in a professional and safe manner.

What I can do to avoid a puncture?

Most punctures can not be prevented, but some of these suggestions may help reduce the risk:

Periodically check the tread of the tire in case there is embedded glass or foreign material.
Make sure your tires are inflated to the proper pressure and do not forget to check the spare wheel.
How I can know that something is wrong?

In case of a slow air loss, it can be visually detected (a tire is more “low” than the others) or pueder be “sense” while driving (vehicle behavior varies gradually).

In the event of a sudden loss of air, immediately it manifests a loss of control at the wheel. Slow down, while holding the steering wheel firmly, until completely stop the vehicle and replace the tire as soon as possible.

If your vehicle is equipped with a Monitoring System Tire Pressure (TPMS), the system alerts you when a loss of pressure in any tire occurs.

If your vehicle is equipped with run-flat tires, you can still control the vehicle when a sudden loss of pressure occurs. RFT tires allow the vehicle to move at a speed of 80 kph for about 80 km. away.

What should I do if I think I’ve had a puncture?

The first step: always visit a professional.

For your own safety and to avoid further damage to the tire, wheel or your own vehicle, you must stop the vehicle as soon as possible, replace the flat tire and get closer to our workshop.

If your vehicle is equipped with Run Flat tires, reinforced sidewall of these tires will allow you to drive safely at a limited speed and distance.

However, also in case of a run-flat tire, we recommend going to our center for your tire can be inspected and repaired or replaced, if necessary.